Extra corrosion protection and fuel system cleaning: Keeps fuel fresh, prevents gum and varnish; Prevents corrosion from moisture and ethanol-induced water attraction; Cleans fuel injectors and intake valves to improve engine performance. Both come in bottle with measurement container.
The Briggs and Stratton gas can is EPA approved with a spill proof CARB fueling system. The design helps with reducing evaporative emissions. The dimensions are 15-1/2" L x 8-3/4" W x 15-1/2" Hgt.
This high-performance polyurethane adhesive/sealant becomes tack free in 48 hours, completely cures in 5-7 days with no shrinkage.
The Eagle Claw Deluxe Clamp-On Rod Holder is great for aluminum boats, kayaks and canoes!
Heavy-duty Lexan® and stainless steel swivel base. Six-point locking, including two 45° positions. For all Cannon® downriggers.
Snap switch design tested to over one million cycles. Highly abrasion resistant marine grade "blocked" wire. Removable base for easy installation and cleaning (models 35A & 37A). Exclusive Rule moisture tight seals and grommet. Environmental friendly mercury free design.
The D-11 Down-East Inboard Rod Holder is equipped with the D-12 Inboard Mount. This vertical mount is permanently fastened to the gunwales of your boat.
These utility hippers are cut with a comfort fit, angled leg opening. Stay dry while wading or standing in shallow water. Constructed with a tough 2-ply 300 Denier poly/rubber fabrication.
Premium waterproof protection. This Jacket has DriPore Gen 2 waterproof fabric with >15,000 mm waterproof and >10,000 MVTR breathability. The outer layer is durable and abrasion-resistant as well as coated in Teflon DWR. And the inner layer's micro-textured tricot fabric is soft and smooth. >15,000…
Put your Minn Kota® trolling motor and Humminbird® fishfinder on speaking terms with i-Pilot® Link?. It delivers fully automatic boat control and the power to find, store and revisit your most productive fishing spots and tracks. And you can take command of it all from either the remote or the…
Economical 2 Ply Rubber Hip boot with knee harness, belt loop straps, cushioned insole, steel shank arch support with lug soles.
The Fishin' Stix Rod Holder is one of the finest available. The Fishin' Stix Rod Holder collapses to 11.5" to fit virtually any tackle box, yet extends to a full 30" (with stops at 18-1/4" and 23-1/2"). Ideal when bank fishing lakes, ponds, rivers, and streams.
Stout Deluxe Breathable Bootfoot Waders. Have 600 grams of Thinsulate in the boot. Hevy duty polyester material. Have the CaddisDry breathable technology. The seams are taped, glued & stitched. Have reinforced knees.
Adjustable suspenders with heavy-duty quick release buckles. Heavy-duty main zipper with dual storm flap and snap closures. Two top load pockets. Zippered thigh pocket. Hideaway D-rings recess when not in use. Above the knee zippered side gussets with hook and loop storm flaps. Elastic waist.…
These Rail Clamp bases are for those who prefer not to drill holes in railing. Pro Series: Round bases are aluminum & square bases are aluminum/plastic for 1-1/4" rails. Rod angle easily adjusted by loosening two nuts and turning the clamp on rail. Li'l Pro Series: Two round rail clamp base models…
Trolling Motor Tie Down, 10" to 18" Adjustable
10" Single Rod Saver Strap, Black
Designed to fit docks, piers, and Jon Boat gunnels. Opens to 1-7/8".
M-16 Manual Inflatable Belt Pack Grey Adult Universal
M-16 MANUAL INFLATABLE CAMO BELT PACK
Li'l Pro Series: 3/8" diameter threaded center hole. Same shape as Pro bases, but slightly thinner. Accepts any Li'l Pro Series holder. Pro Series: Fits any 2" flat surface. Attach with three 1/4" X 1 1/2" screws in fiberglass or wood. For attaching to aluminum, use bolts.
Attwood® mushroom anchors are an economical solution for lightweight boats. The wide-area mushroom cup provides sufficient holding power in mud and weedy bottoms. Constructed of gray cast iron with a steel eye. Available with aluminum-painted or black PVC-coated finish.
A/M-24 Automatic/Manual Inflatable Life Jacket, Green, Size Adult Universal
Minn Kota Model Flat Foot Tray, w/Drain Line, Clamp, Screws, Aluminum, Boxed
Jump Starter22, 20Wh, Jumps up to 4.6L gas/2.4L diesel, smarty clamps, IP65, 300 lumens, charges USB devices
* U.S. Coast Guard approved Type V life jacket with Type III performance. Soft neoprene neckline for all day comfort. Durable ripstop fabric resists tears and punctures. Use Onyx Rearming Kit #1350 (see pg. 25).
Lightweight and durable foam construction. Bright colored shoulders with reflective piping for increased visibility. Nine segmented hinge points. 200 denier nylon ripstop and nylon oxford. Lash tab and D-ring for small accessories.
The band and housing components are made of high grade 300 series stainless steel. The 5/16" hex head screw is made from 400 series stainless steel.
Simply snap the Release Clip assembly on to the existing terminal end of your downrigger. Assembly allows the ball to remain safely in the water while you attach your finishing line. Constructed of 135 lb. nylon coated stainless steel wire, stainless steel thimbles, with snap lock and swivel.
Bearing protection and lubrication for all kinds of trailers. Water and dirt are kept out of the hub. Internal pressure is always maintained at 3 p.s.i. Quality construction - stainless steel internal parts, triple chrome-plated barrel.